::: Cold Drawn Steel Bars (by Location)
Individual product features of steel bars offered by our STLCD/QES facilities:- Diameter control can be maintained as close as +/-.0004" in the cold drawn condition on certain high volume applications.
- Straightness is measured on a T.I.R. basis.
- Length tolerance is maintained well within the industry standards. Linear motor shears have been installed in several of our locations which allow for length tolerance to be held within +/- .125".
- All coil-to-bar drawing lines are equipped with non-destructive eddy current surface
in-line testing.
- Chamfering available at all locations.
All Locations Are ISO 9001:2000 Registered Facilities
| Machine | Location | Shape | Size | Comments |
|---|
Chain Track
(CT) | St. Louis,
Missouri | Round
Hexagon | .3125" to .8661"
.2362" to .7087" | Inclusive
Inclusive |
Schumag
(IIB) | St. Louis,
Missouri | Round
Hexagon
Square | .4375" to .750"
.4375" to .750"
.4375" to .750" | Inclusive
Inclusive
Inclusive |
Kieserling
(IIIB) | St. Louis,
Missouri | Round
Round
Hexagon | .625" to 1.625"
.625" to 1.1875"
.625" to 1.500" | All grades 0.38 carbon max
All grades carbon & alloy
All grades carbon & alloy |
Draw Bench
(DB) | St. Louis,
Missouri | Round
Hexagon
Square | .750" to 3.000"
.750" to 2.500"
.750" to 2.500" | Inclusive
Inclusive
Inclusive |
| |
Chain Track
(CT) 20T | Point Pleasant,
West Virginia | Round
Round
Hexagon | .625" to 1.500"
.625" to 1.250"
.500" to 1.500" | All grades 0.38 carbon max
All grades carbon & alloy
All grades carbon & alloy |
| |
Chain Track
(CT) 8T | Apodaca,
Mexico | Round
Hexagon | .250" to .750"
.250" to .750" | Inclusive
Inclusive |
Schumag
(IIB) | Apodaca,
Mexico | Round
Hexagon |
.3125" to 1.181"
.2813" to 1.063" | Inclusive
Inclusive |
Draw Bench
| Apodaca,
Mexico | Round
Hexagon | 1.000" to 2.500"
1.000" to 2.500" | Inclusive
Inclusive |
Typical Carbon Grades Supplied: 1008, 1010, 1018, 1022, 1025,
1030, 1035, 1038, 1040, 1045, 1050, 1060, 1110, 1117, 1118, 1137, 1141,1151,
1215, 12L14, 1541 - including
injected steels.
Typical Alloy Grades Supplied: 4037, 4118, 4140, 5116, 5125, 5160,
8620, 52100, 9254 - including injected steels.
|
Typical Applications
for STLCD/QES Cold Drawn Steel Bars • Electric Motor Shafts
• Shock Absorbers
& MacPherson Struts
• Bearings
• Screw Machine Parts
• Stabilizer Bars
• Click here to see more
applications for our
products.
|
